spring back
美 
英
- v.彈回
- 網絡回彈；彈性后效；彈回到原來的位置
同義詞
英漢解釋
例句
From time to time, parts of that plate spring back, like a ruler bent over the edge of a desk and let go.
有時，有部分板塊會彈回去，就好像將一把尺子在桌子邊緣壓下去再松開那樣。
The imitation of spin-up and spring back drag loads is the important factor affecting the result of landing gear drop tests.
起轉和回彈載荷的模擬是影響起落架落震試驗結果的重要因素。
Elastic deformation is that part of the deformed material which when the applied load is removed would spring back to its normal shape.
彈性變形是材料變形部分在去除載荷后可以恢復到原來的形狀。
When pressure is removed the metal spring back to its original shape .
當壓力消除了金屬彈簧回復到原來的形狀。
How to effectively control the spring-back and guarantee the quality have always been the keys and difficulties in stamping forming.
如何有效的控制回彈并保證零件成形質量一直都是研究的重點和難點。
When aluminum is hit, you can see a dent. Composites, though, spring back to the original shape, which could hide internal damage.
當鋁受到撞擊時會出現明顯凹痕，而復合材料則會自動回復原來形狀，使它所受的損傷難以察覺。
Worry, fear, self-distrust bows the heart and turn the spring back to dust.
擔憂、害怕、自我放逐使心靈扭曲，使春之朝氣灰飛煙滅。
After release of the vacuum, the lens would spring back into the "Schmidt shape" needed for the camera.
獲釋后的真空，鏡頭將春天重新納入“施密特形狀”所需要的相機。
A combination of various materials and processes make it difficult to obtain the predicted spring-back.
結合各種材料和工藝，因此難以取得預期的回彈。
The spring back and secondary yielding of cylindrical billets in elastic tools during upsetting and closed-die upsetting are analyzed.
對圓柱形工件在彈性工具中鐓粗和閉合模鐓粗時的回彈和二次屈服進行了分析。
Please, next spring back to me to sing.
明年春天請你回來，還唱歌給我聽。
In the winter received a greeting card, or a blessing of the message, but also allow me to read out the winter to spring back, Blossoming.
在冬天里收到一張賀卡，或是一條祝福的短信，也能讓我讀出冬去春回，花開富貴。
When the man, I will not go to that place, that a spring, back to that of a city!
當這個人，我不會去那些地方，那個春天，回到那個城市！
Each bending angle and the corresponding spring-back values are measured, and the output signal is computerized.
每個彎曲角度及相應的回彈值進行測量，并輸出信號是電腦。
Product features : spring-back positioner, inseparable; mechanism to prevent drawer from springing out.
產品特點：回彈定位器，不可分離。防止抽屜彈出機構。
Herbs, I've discovered, are tough. With every hard freeze they die off, then spring back to life.
我發現，草本植物的生命力十分頑強，寒冬凋謝，春日復蘇。
In recent years, Numerical simulation technology has become an important means to spring-back prediction.
近年來，有限元數值模擬技術已成為預測回彈的重要手段。
It is necessary to propose a modified equivalent draw bead model to improve the precise of spring back prediction.
為了提高回彈的頂測精度，有必要提出修正的等效拉延筋模型。
"The filaments get all deformed like springs and then they spring back, " Wenger said.
“絲們像彈簧一樣變形，接著它們彈回去，”Wenger說。
In fact, employment is unlikely to spring back sharply anywhere in the OECD but for very different reasons.
事實上，不是所有經合組織的成員就業率都會大幅回調，其中原因各有不同。
The fleece device includes cam control spring back frame structure.
起絨裝置具有對經線起絨的凸輪控制回彈架結構；
A failure mode of pyriform hole and the concepts of slip and spring back were put forward.
提出了梨形孔的破壞模式和彈體在靶板上滑移、回彈的概念。
I spring back to the topic of early stage VCs.
我又把話題帶回到初期投資這個點上。
They spring back into action after being dried out and also resist radiation.
它們一度被曬干，然后在春天恢復活動，它們還可以忍受放射性。
spring back, as from a forceful thrust.
因強有力的推力使跳回。
HO: And on my turn, I Spring Attack 5 feet to the left, attack, and spring back 15 feet. Now you have to charge me again to attack!
那么到我的回合了，我向左5尺跳躍攻擊，然后向后跳回15尺。現在你想打我還得再沖鋒一次！
In the research conducted by Tan et al. [2], a simple method is proposed to prevent the spring-back.
在所進行的研究談等。[2]，一個簡單的方法，提出防止回彈。
That is why some mathematical models are developed to predict the spring-back.
這就是為什么一些數學模型，開發預測回彈。
Pay me the spring back!
把能源泉還給我?。?/jz>
Influence of different technology modes on spring-back in multi-point forming
不同的多點成形工藝方式對回彈的影響
Numerical Simulation of Spring-back in Bend-forming U-shaped Parts
U形件彎曲成形中回彈的數值模擬研究
Effect Rule of Pre-Stretch Force on Angle Profile Part Spring-Back in the Process of Stretch-Bending
拉彎過程中預拉力對角型材零件回彈的影響規律
Mechanics and Spring-back Analysis for the Stretch-bending Process of Extruded Profile with Lateral Compression
等邊角型材帶側壓型材拉彎的力學與回彈分析
Analysis of Spring Back in Tube Flatting Process
管材壓扁的回彈分析
Experiments and Analysis on the Spring-Back in Rotary-Drawing Tube Bending
管材的回轉牽引彎曲試驗及回彈分析
Influence of Loading Path on Spring-Back in Bending
加載路徑對彎曲件回彈影響的機理
Spring Back and Secondary Yielding Analyses with Endochronic Constitutive Model
基于內時大變形彈塑性本構模型的回彈和二次屈服分析
In Rectangle Section Annular Part Bending Deformation Course Spring-back Problem Research
矩形斷面環形件彎曲成形過程中彈復問題的研究
Spring back and its compensation test in deep-drawning process of automobile panels by FEM
汽車覆蓋件深拉延有限元仿真過程中的回彈及補償試驗
Mechanical and spring-back analysis for the stretch-bending process of extruded profile
型材拉彎的力學與回彈分析
